All
Equipment is Available for Lease / Purchase / Short-Term Rental
Overview
The Sun StorEdge™ S1
array is an ideal solution for rack-intensive environments where fast
data transfers, efficient space utilization, and compatibility with a
wide range of Sun™ servers are critical concerns. The device delivers
excellent performance - up to 160MB/sec. throughput - while its 1U form
factor, compact footprint, and a variety of rack options allow it to fit
neatly into standard rack environments. Rack-optimization features such
as front-to-back airflow, front-accessible hot-swap disks, front and rear
LEDs, and 12-meter cabling help enable better utilization of precious
rack space and help make servicing easier. The Sun StorEdge S1 array works
with a variety of Sun Netra™ and general-purpose workgroup and enterprise
servers. And together with Sun's other rack-optimized 1U servers and PCI
system expander, the Sun StorEdge S1 array supports modular computing,
helping companies to balance performance, storage capacity, and PCI connectivity
- affordably.
Specifications
Architecture
Carrier Features
Supports 19-in., 23-in., 24-in.,
and 600-mm rack configurations, with fixed-rail options
Flame-resistant, fireproof metal enclosure
NEBS Level-3 Certified
Status and sensors
Device and drive status information
accessible from host server
Front and rear LEDs for system and drive status
LVD/SE (160/40 MB/s) SCSI
Standard ANSI (X3.131-1994,
X3.277-1996, SPI-3X3.252)
Maximum cable length 12 meters for LVD and 3 meters for SE SCSI
Direct connect to host on-board SCSI port with no host adapter
Disk
Drives
Form factor
3.5-inch low-profile, LVD
Supported drives
18.2 GB or 36.4 GB, 10,000
rpm
Array Capacity
Up to 3 hot-swap hard disk
drives
Software
Operating System
Sun Solaris[tm] 2.6 Operating
Environment and higher
Sun[tm] Cluster 3.0 (with Netra T1 AC200/DC200, Netra E1 PCI System Extender,
and Sun StorEdge S1 array)
Remote monitoring through Storage Subsystem Manager software
Supported
Platforms
Servers
Netra T1 AC200/DC200
Netra t 1120/1125
Netra t 1400/1405
Netra ct 400/800
Sun Enterprise[tm] 220R/420R
Sun Fire 280R
Sun Fire 15K
Environment
Power
AC or DC
AC Power
100-240 V AC, single-phase
(47-63 Hz)
DC Power
-48/-60 V DC
Input current
Less than 2 A at 100V AC (150
W)
Less than 4 A at -40V AC (150 W)
Operating temperature
5º C to 40º C (41º
F to 104º F), 5% to 85% relative humidity, noncondensing (not to exceed
0.024 kg water/kg of dry air)
Short-term operating
temperature
-5º C to 55º C (23º
F to 131º F), 5% to 90% relative humidity, noncondensing (not to exceed
0.024 kg water/kg of dry air)
Nonoperating
temperature
-40º C to 70º C (-40º
F to 158º F), 90% maximum relative humidity, noncondensing
Acoustic noise
Less than 60dBa (GR-63-CORE
Test Method)
Seismic
Meets GR-63-CORE requirements
for earthquake risk zone 4
Heat
output
150 W, 512 BTUs/hr
Regulations
Meets or exceeds
the following requirements:
Safety
UL/CSA-60950, EN60950, IEC950
CB Scheme with all country deviations
RFI/EMI
EN55022/CISPR22 Class B, FCC
CFR47 Part 15 Class B, EN61000-3-2, EN61000-3-3, EN 300 386 V1.2.1 (2000-03)
- Telecom Center Only
Immunity
EN55024, EN 300 386 V1.2.1
(2000-03) - Telecom Center Only
All
Equipment is Available for Lease / Purchase / Short-Term Rental