All Equipment is Available
for Lease / Purchase / Short-Term Rental
Overview
With Sun's Netra™ st D130
thin storage, Sun delivers the kind of reliable, cost-effective incremental
storage service providers need. The Netra st D130 system's low-profile,
rack-mounted-ready 1U form factor means it fits cleanly into standard racks,
for increased rack density. It's also easily serviced, with with status
LEDs in the front and back of the chassis and also includes front-accessible
hot-swap drives. The system is NEBS level 3 compliant, so it delivers Sun's
high level of reliability and availability, even in harsh environments.
Plus, the choice of AC or DC power supplies makes the system an excellent
performer in any computing environment. Sun's Netra st D130 rackable thin
storage delivers reliable, cost-effective, carrier-grade incremental storage-together
with the availability and serviceability features Sun is known for.
Specifications
Architecture
Carrier features
19-in. rack-mount standard;
supports 23-in., 24-in., and 600mm rack options, with fixed and rail options
Flame-resistant, fireproof metal enclosure Telcordia Technologies NEBS
compliant
Status and Sensors
Device and drive status information
accessible from host server
Front and rear LEDs for system and drive status
Ultra SCSI, single-ended
Standard ANSI (X3.131-1994,
X3.277-1996)
Maximum length six meters
Direct connect to host on-board SCSI port without need for host adapter
Disk Drives
Form factor 3.5-in. low-profile
Ultra SCSI SE
Supported drives 18 GB or 36 GB, 10,000 rpm
MTBF (per drive) 800,000 hours
Software
Operating System
Remote monitoring through
SCSI bus
Supported
Platforms
Servers
Netra t 1400, Netra t 1405,
Netra t 1120, Netra t 1125, Netra T1, Enterprise 220R/420R, 3500, 4500,
5500, 6500 and other Sun[tm] servers; Solaris[tm] 2.5.1 Operating Environment
and higher
Environment
AC power
Power Choice of AC or DC
100-240 VAC, single-phase (47-63 Hz)
DC power
-48/-60 VDC
Input current
Less than 2 A at 100 VAC
(150 W)
Less than 4 A at -40 VDC (150 W)
Operating temperature
0º C to 40º C (32º
F to 104º F), 5% to 90% relative humidity,
noncondensing, subject to a maximum absolute humidity of
0.024 kg water/kg of dry air
Short-term operating
-5º C to 55º C (
3º F to 3 º F),
5% to 90% (96 consecutive hours)
Non-operating
-40º C to 70º C (
-40º F to 158º F),
5% to 95% relative humidity, noncondensing
Elevation operating
0m to +3000m
Acoustic noise
Less than 60dBa (GR-63-CORE
Test Method)
Seismic
Meets GR-63-CORE requirements
for earthquake risk zone 4
Heat output
150 W, 512 BTUs/hr
Regulations
Safety
UL 1950, CSA C 22.2-No. 950,
EN 60950 (73/ 23/EEC), IEC 950
Emissions
CFR Title 47 FCC Part 15,
EN 55022 (89/336/EEC)
Immunity
EMC Directive (89/336/EEC),
EN50082-1
Telco Environment Telcordia
GR-63-CORE, NEBS GR-1089-CORE,
TR-NWT-000295
NEBS
Certified
Telcordia
SR 3580 NEBS Level 3
Safety
cULus Mark, TUV GS Mark,
CE Mark
EMC
CE Mark (93/68/EEC), FCC
authorized Class A
Dimensions
and Weight
Height
4.4 cm (1.73 in.)
Width
43.6 cm (17.2 in.)
Depth
47.2 cm (18.6 in.)
Weight
(w/o drives) 5.9 kg ( 13
lb.)
(w/3 drives) 8. 6 kg ( 18 lb.)
