All Equipment is Available for Lease / Purchase
/ Short-Term Rental
Overview
The reliable, scalable, rack-ready
server powered by UltraSPARC[tm]-III technology. For service provision,
e-commerce, financial services, branch office automation - any function
that requires exceptional power and reliability in a compact, rackable
package - the Sun Fire[tm] 280R server is an ideal solution. It's powered
by up to two high-performance UltraSPARC[tm] -III processors and features
the RAS capabilities Sun[tm] servers are known for, including redundant
hot-swap power supplies with independent power cords, hot-plug power subsystems,
and front-accessible drives. Its fibre-channel hard disk drive backplane
offers software-mirrored hot-plug boot drives. Plus, it provides Remote
System Control for simple, lights-out management. And with its 4U form
factor, the Sun Fire 280R server fits neatly in standard 19-inch racks
- perfect for any environment where space is at a premium.
Specifications
Processor
Options
Architecture
Superscalar SPARC[tm] v9,
UltraSPARC-III
Memory management
MMU with 64 I-TLB entries
and 64 D-TLB entries, 8192 hardware-supported contexts
Cache
64-KB data and 32-KB instruction
on chip
Secondary: 8-MB external
Main memory
Total of 8 DIMM memory
slots available
128-, 256- or 512MB; or 1-GB expansion (8 GB maximum)
Note: Install DIMMs in groups of four.
Standard
Interfaces
Network
Ethernet/Fast Ethernet,
twisted pair standard (10-BaseT and 100-BaseT)
One or two N+1 redundant,
hot-swap universal input (one supply standard); individual power cords
Maximum DC output
560 W
Power bus
Common, load-sharing
Power
and Heat Information
Input Power Requirements
115VAC, 4.34 Amps
Actual Power Consumption
for fully loaded 2-cpu 750MHz UltraSparc-III Sun Fire 280R server
483.8 Watts
Heat Dissipation
1650 BTU/hour
Enviroment
AC power
100-240VAC 47-63Hz, 0.4
K VA
Operating
5 C to 40 C (41 F to 104
F) 20% to 80% relative humidity, noncondensing
Nonoperating
-20 C to 60 C (-4 F to
140 F) 5% to 95% relative humidity, noncondensing
Regulations
Meets or exceeds the following
requirements: Safety UL 1950, CSA C22.2 No. 950, TUV EN 60950, IEC
950 CB Scheme with full deviation, including Nordic deviations EMKO-TSE
(74-SEC) 203, ZH1/618
RFI/EMI - FCC Class A, Industry Canada Class A, VCCI Class A, EN 55022
Class A, EN 61000-3-2:1995, EN 61000-3-3:1995
Immunity - EN 55024:1998
X-ray - DHHS 21 Subchapter J; PTB German X-ray Decree
Dimensions
and Weights
Sun Fire 280R chassis
Height
17.6cm (6.95 in.)
Width
43.8cm (17.25 in.)
Depth
69.2 cm (27.25 in.)
Rack
Fits into a standard commercial
19-inch wide, 36-inch deep rack
